AUTOMATIC STATIONERY MAKING MACHINES
We are expert in producing the complete set of Stationery Making Machinery, including Gem Clip and Paper Pin Making Machines, which are of high class and most welcome to our customers.
Accordingly, we are specifing the procedures of manufacturing the above-mentioned products as contained herein.

 

<<GEM CLIP MAKING MACHINE>>
The process for Gem Clip making¡G Raw material ..... Gem Clip Making Machine .... Nickel Electroplating...... Packing.
The main material for Gem Clip making is Bright Iron Wire of B.W.G. specification, of which the diameter is based on the products required.
You may purchase the wire material yourselves from other source or from us direct. Owing to necessity in manufacturing, we would supply you with un-electroplated original iron wire.

The specification of Gem Clip Making machine:
Model No. JC-32A JC-32B JC-40B JC-32C1 JC-40C JC-32D1 JC-32D2
Output (pcs/min.) 130 220 440 150 300 100 100-120
Made shape Triangle Center Up Round Round Boat Boat Butterfly  Butterfly 
Power (HP) ½ ½ ½ ½ ½ ½ ½
Net Weight (approx.) 185Kgs 185Kgs 250Kgs 185Kgs 250Kgs 250Kgs 220Kgs
Gross Weight (approx.) 230Kgs 230Kgs 295Kgs 230Kgs 295Kgs 300Kgs 265Kgs
Carte Dimensions (LxWxH) 49"
39"
34"		 49"
39"
34"		 48"
39"
36"		 49"
39"
34"		 48"
39"
36"		 65"
42"
31"		 53"
37"
29"
We wish to invite your kind attention to the following three points¡G 
  • In order to increase productivity and quality, it would be better to use one (1) machine for one  (1) size of product only..
  • Manufacturing of Gem Clips and Paper Pins employs the same raw material (original iron wire ) and the same Nickel Electroplating Equipment.
  • Our quotation does not include Nickel Electroplating Equipment's cost

Following are our standard sizes for Gem Clips for your reference¡G

Shape No. d(ø)/B.W.G. I
(mm)		 h
(mm)		 d
(mm)		 Capacity pcs/min. Packing Condition  Consumption
per box (g)		 pcs/kg
A-01 0.81/#21 20 15 6.5 130 100 pcs/box 38 2600
A-02 0.89/#20 26 20 8 130 100 pcs/box 45 2222
A-03 1.07/#19 31 22 9.5 130 100 pcs/box 71 1500

B-01 0.81/#21 28 23 7 220-440 100 pcs/box 36 2800
B-02 0.89/#20 33 25 8 220-440 100 pcs/box 55 1970
B-03 1.07/#19 35 26 8 220-440 100 pcs/box 70 1433
B-04 1.30/#17½ 50 38 11 180 100 pcs/box 165 640
B-05 1.7/#16 77 63 16 100 100 pcs/box 240 210

¡@

Shape No. d(ø)/B.W.G. I
(mm)		 h
(mm)		 d
(mm)		 Capacity pcs/min. Packing Condition  Consumption
per box (g)		 pcs/kg
C-01 0.81/#21 20 16 6.5 150-300 100 pcs/box 35 2800
C-02 0.89/#20 27 20 7.5 150-300 100 pcs/box 52 2300
C-03 1.07/#19 36 28 11.5 150-300 100 pcs/box 67 1100
D-01 1.83/#15 48 62 48 100 12 53 185
D-02 1.47/#17 32 38 32 120 50 125 315
D-03 1/#19 17 20 17 130 100 55 1818
You are kindly requested to indicate which SHAPE NUMBER and output per hour of each size you are intended to produce. Your samples of each shape will be most welcome.

.

<<PAPER PIN MAKING MACHINE>>
The process for Paper Pin making ¡G
Raw materials..... Paper Pin Making Machine .... Nickel Electroplating ... Packing.  The raw material (original iron wire) and Nickel Electroplating Equipment for Paper Pins are the same as those for Gem Clips, and can be used for both products. Our Paper Pin Making Machine is capable of producing various sizes of products by adjusting is metal mold. Should you be interested in our machine, kindly advise us of your intended specifications (see Table 3B) and the corresponding capacity of pcs/hr. Your samples will greatly facilitate this matter.

The specification of Paper Pin Making Machine¡G
Model No. JC-38
Output (pcs/min) 200-240
Power (HP) 1
Net Weight (approx.) 350Kgs
Gross Weight (approx) 450Kgs
Crate Dimensions (LxWxH) 59"x36"x51"

Following are our standard sizes for Paper Pins for your reference¡G

 Shape No. d(ø)/B.W.G. I (mm) Capacity pcs/min. Packing Condition  pcs/kg
0725 0.71/#22 25 200-240 100g/box 10500
0832 0.81/#21 32 200-240 100g/box 7812
0838 0.81/#21 38 200-240 100g/box 5263

¡@

AUTOMATIC COLOR PVC COATED CLIP MAKING MACHINES
The Specification of PVC Coated Making Machine¡G
Model No. JC-38BP
Output (pcs/min) 110-150
Power (HP) 1/2
Net Weight (approx.) 200kgs
Gross Weight (approx) 250kgs
Crate Dimensions (LxWxH) 51"x51"x34"
We wish to invite your kind attention to the following¡G
  • In order to increase productivity and quality, it would be better to use one (1) machine for one (1) size of product only, (That is better for machine and also can extend machine's life.)
  • Raw Material¡G PVC coated wire
  • 3.Auto-stop control.
  • 4.Very easy to operate and maintain.
  • 5.One operator can Handle 15 sets Machines simultaneously.

¡@

Following are our standard sizes for PVC coated clips for your reference¡G

Shape No. D(ø)
 (mm)		 I
(mm)		 H
(mm)		 B
(mm)		 Capacity pcs/min. Packing Condition pcs/kg
BP-01 1.1 28 21 7.5 150 100 pcs/box 2450
BP-02 1.3 33 24 9 130 100 pcs/box 1650
BP-03 1.5 50 38 11 110 100 pcs/box 630
AP-01 1.1 28 19 8 130 100 pcs/box 2400
AP-02 1.3 32 21 9 120 100 pcs/box 1620